Activating Your Device - MADRIX PLEXUS Handbuch

MADRIX PLEXUS User Manual (English) 33
Configuring Your Virtual Matrix
You will need to configure your virtual matrix according to your LED installation.
In MADRIX, navigate to the menu 'Preferences' 'Matrix Generator' or 'Preferences'
'Patch' for this task.
For more information, please read the MADRIX Help And Manual.
Configuring DMX-OUT

Activating Your Device

In MADRIX, navigate to 'Preferences' 'Device Manager' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices.
Press 'Rescan For Devices' if your device is not shown in the list.
Two list entries will be created for your PLEXUS device, one entry for every DMX port ('DMX 1' and
'DMX2').
© 2011 inoage GmbH