34
MADRIX PLEXUS User Manual / Handbuch
By default, 'Enable' as well as 'Output' should be enabled for every DMX port.
Please check if both options, 'Enable' and 'Output', are activated!
Your PLEXUS device is now configured to output DMX data.
Setting Up The DMX Universe
use the two arrow buttons to adjust the values. Press 'Apply' afterwards.
Make sure that this configuration match the settings of your virtual matrix in the Patch.
In the next step, set up the DMX 'Universe' for each DMX port. Simply
© 2011 inoage GmbH