114
MADRIX PLEXUS User Manual / Handbuch
Blinking
green
Fading between
green
+
red
Manually Installing The PLEXUS Driver
When Windows indicates that the hardware driver has not been installed correctly, please
manually update the driver.
In Windows Vista or Windows 7, click 'Start'
'System')
'Device Manager'. Right-click on 'MADRIX PLEXUS' in the section 'Other devices' and
choose 'Update Driver Software...'. Then, navigate to the driver location on your harddisk:
'C:\Program Files (x86)\MADRIX\madrixusbdriver\plexus\windows'
In Windows XP, click 'Start'
Manager'. Right-click on 'MADRIX PLEXUS' in the section 'Other devices' and choose 'Update Driver
Software...'. Then, navigate to the driver location on your harddisk:
'C:\Program Files\MADRIX\madrixusbdriver\plexus\windows'
Important Note
If new drivers and a new firmware are available for the MADRIX PLEXUS, please always update the
firmware first and then the drivers!
Tips
This section includes various scenarios to help you trouble shoot when problems occur.
The device has stopped sending DMX data!
Please navigate to the PLEXUS menu 'Tools'
Reading or writing data from or to the SD card.
The interface works correctly.
SD card is inserted.
The interface works; No data is read or written.
'Settings'
'Control Panel'
'Control Panel'
'System and Security' (or just
'Systems'
'Freeze' and check if 'Running' is displayed.
tab 'Hardware'
'Device
© 2011 inoage GmbH