MADRIX PLEXUS Handbuch Seite 16

16 MADRIX PLEXUS User Manual / Handbuch
'Brightness on' specifies how bright the display is, when it is
used.
'Brightness dimmed' specifies how bright the display is, when
it gets dimmed.
'Dim afer' specifies after how much time the display will be
dimmed.
'Contrast' specifies the how well the display can be read.
'Invert' specifies if the colors of the display will be inverted,
or not. Black background and a white font are the default
settings.
You may change the settings in this menu, on the device.
Device Navigate to the menu 'Settings' 'Device'.
You may change basic settings of the device in this menu.
'Language' specifies the language of the PLEXUS menus. You
can set English or Deutsch (German).
'Rotate 180°' will rotate the display by 180°. The displayed
menus will be shown upside down. Please note, at the same
time the assignment of the 5 control buttons will also be
rotated by 180° to suit the rotated display.
'Timers' can be Enabled or Disabled. This activates or
deactivates all Timers on the device globally, even if they
are configured in your PLEXUS Configuration.
'Ports' can be Enabled or Disabled. This activates or
deactivates all Ports on the device globally, even if they are
configured in your PLEXUS Configuration.
You may change the settings in this menu, on the device.
© 2011 inoage GmbH