MADRIX PLEXUS Handbuch Seite 91

'Type' defines the character for each Port. On the one hand, 'Ports 1 - 6' can be either
'Digital Input', 'Digital Output' or 'Analog Input'. On the other hand, 'Ports 7 -
10' are only digital ports and can be switched from 'Digital Input' to 'Digital
Output' and vice versa.
'Invert' defines if the status of the Port (1 = On, 0 = Off) will be reversed to 0 = On, 1 =
Off.
'Action' defines the type of event that will be triggered when a Port is triggered. Applicable
values are: 'No', 'Scene', 'Intensity', 'Speed', 'Next', 'Previous', 'Stop', 'Play',
'Pause', 'PlayPause', 'Freeze'. 'Scene' will trigger a Scene. 'Intensity' adjusts the
brightness. 'Speed' will trigger a change of tempo. 'Next' or 'Previous' skip to the
last or next entry. 'Stop', 'Play', and 'Pause' end, start, or halt the playback.
'PlayPause' will start or halt the playback. 'Freeze' will halt the output.
'Value' defines the 'Action' in more detail. Enter a number to specify a certain Scene. Enter
a value from 0 to 100 for 'Intensity'. Enter a value from 1 to 1000 for 'Speed'.
'Threshold can be entered when using 'Analog Input'. Specify the limit an analog input must be
High' moved up to before the event is triggered.
'Threshold can be entered when using 'Analog Input'. Specify the limit an analog input must be
Low' moved back before the event is triggered.
Data Files:
The tab 'Data Files' shows all DMX Data Files (*.dxd) that are used in the selected PLEXUS
Configuration. It represents a database of your DMX Data Files within one PLEXUS Configuration.
(Remember that you need DMX Data Files (*.dxd) in order to create
First, please select one PLEXUS Configuration you wish to edit.
Adds a new DMX Data File (*.dxd).
© 2011 inoage GmbH
MADRIX PLEXUS User Manual (English)
Scenes
91
.)
82