Menu Tools
The PLEXUS menu 'Tools' contains 4 entries.
Monitor
DMX1
Monitor
DMX2
Test
Sending
© 2011 inoage GmbH
MADRIX PLEXUS User Manual (English)
You can check the Sync type (Master, Slave, Off), Sync
group (1 -256), and if Speed (Enabled, Disabled) and Master
(Enabled, Disabled) will be synchronized between PLEXUS
devices. For more information, see
.
97
You may change the settings in this menu, on the device.
Navigate to the menu 'Tools'
Use this menu to monitor and check DMX data output or
input of the first XLR port (DMX 1).
Navigate to the menu 'Tools'
Use this menu to monitor and check DMX data output or
input of the second XLR port (DMX 2).
Navigate to the menu 'Tools'
Use this menu to send DMX values for testing purposes.
Press
or
to change the DMX channel.
Minimum channel is 1. Maximum channel is 512.
Press
or
to change the DMX value that is being sent.
Minimum value is 0. Maximum value is 255.
Managing Devices Further
'Monitor DMX1'.
'Monitor DMX2'.
'Test Sending'.
13