Dmx-In - MADRIX PLEXUS Handbuch

38 MADRIX PLEXUS User Manual / Handbuch
1.3.2.2

DMX-IN

Overview
The PLEXUS allows you to receive data via MADRIX using 1024 DMX channels per device.
Please use a Male to Male 3-pin or 5-pin XLR Gender Changer if necessary.
Enabling USB Drivers In MADRIX
Please make sure to enable USB drivers in MADRIX.
For more information, see Loading And Enabling Drivers In MADRIX .
28
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX directly to a free USB 2.0 port of your computer or use the USB
power supply (or USB 2.0) and the network connection for Art-Net. If the MADRIX PLEXUS driver
has been installed properly, the status LEDs will light up accordingly, as described in the chapter
Troubleshooting .
113
Start the MADRIX software now if not yet done.
Configuring DMX-IN
Activating Your Device
In MADRIX, navigate to the menu 'Preferences' 'Device Manager' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices which were found in the network.
© 2011 inoage GmbH