MADRIX PLEXUS Handbuch Seite 90

90 MADRIX PLEXUS User Manual / Handbuch
'Type' defines the how often the 'Action' is triggered. Applicable values are: 'Once',
'Cycle', 'Daily', 'Weekly', 'Monthly', 'Yearly'. 'Once' will trigger the event only
one time. 'Cycle' will trigger the event according to the 'Cycle Interval', for example
every 10 minutes.
'Start' defines the date and time, that means when the event will be triggered.
'Valid From' defines together with 'Valid Thru' a time interval, in which the event will be
triggered. 'Valid From' sets the starting point.
'Valid Thru' defines together with 'Valid From' a time interval, in which the event will be
triggered. 'Valid Thru' sets the end point.
'Cycle defines a time period for the 'Type' 'Cycle' in HH:MM:SS (Hours:Minutes:Seconds).
Interval'
Extension Ports:
The tab 'Extension Ports' allows you to configure the individual pins of the extension port.
First, please select one PLEXUS Configuration you wish to edit.
Resets all settings of selected Ports to their default value. This will discard any changes
you have made.
Please edit the following columns according to your requirements.
(Perform a double-click to change their values. Use Enter to apply your changes. Use Escape to
cancel.)
© 2011 inoage GmbH