MADRIX PLEXUS Handbuch Seite 78

78 MADRIX PLEXUS User Manual / Handbuch
Adds a list entry. Do not forget to adjust the entry 'DMX 1' and 'DMX 2' as well as
'Author', 'Scene Name', 'File Name' for each list entry.
Removes an entry from the list. Select an entry in the list first. You can also use the
'Delete' key on your keyboard.
Duplicates list entries. Select one or several entries in the list first. The File Name will
automatically be adjusted.
You may edit the each entry.
'Author', 'Scene Name', 'File Name' can be changed. They define how the new DMX Data File
will be named after the conversion. Select an entry. Double-click on the particular column and
enter the values or characters using the keyboard. Use Enter to apply your changes. Please
make sure that your 'File Name' has the ending '*.dxd'.
'DMX 1' defines which DMX universe of your virtual matrix (Patch) will be used for the first output
port of your PLEXUS. Select an entry. Perform a double-click and simply enter the number of the
universe. Use Enter to apply the changes. Select 'No' if the output port should be deactivated.
'DMX 2' defines which DMX universe of your virtual matrix (Patch) will be used for the second
output port of your PLEXUS. Select an entry. Perform a double-click and simply enter the number
of the universe. Use Enter to apply the changes. Select 'No' if the output port should be
deactivated.
'Use Master Values' can be activated if you have used the Master Fader during recording. Then,
your converted record will include the brightness levels set by the Master Fader during the
recording. Leave the option unchanged if your did not use the Master Fader during recording.
© 2011 inoage GmbH