MADRIX PLEXUS Handbuch Seite 80

80 MADRIX PLEXUS User Manual / Handbuch
3. Press the button 'Generate' to convert the MADRIX Record File (*.mrec) into one or multiple
DMX Data Files (*.dxd).
4. The newly create DMX Data Files (*.dxd) will be added to the list above.
Please note:
You can create several, different DMX Data Files (*.dxd) from one MADRIX Record File (*.
mrec).
Your MADRIX Record File (*.mrec) will not be deleted when a new DMX Data Files (*.dxd) is
generated.
When using multiple devices at the same time in one installation, you will need multiple DMX Data
Files (*.dxd). When using the button 'Generate', all list entries in the tab 'PLEXUS Conversion'
will be used to automatically create multiple DMX Data Files.
Warnings:
When generating *.dxd files, you may encounter two messages.
1) As described above, you need to configure your virtual matrix (Patch Size) correctly, before
generating DMX Data Files. This message box is a reminder to check if your Patch settings are
configured correctly. Press 'Yes' if you would like to proceed with your current settings. Press 'No'
if you would like to change your settings.
© 2011 inoage GmbH