Art-Net; Configuring Network Settings - MADRIX PLEXUS Handbuch

1.3.2.3

Art-Net

Introduction
The Art-Net protocol is a widely known standard to transfer DMX512 over Ethernet (network).
Using MADRIX
Please make sure to install the MADRIX software first.
For more information about the installation process, see the MADRIX PLEXUS Quick Start Guide or
the MADRIX Help And Manual.
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX to your computer using the network connection. Your device
can be powered via the USB port or by using the external power supply.

Configuring Network Settings

Please make sure that the network settings of your operating system and the settings of
your PLEXUS device are correct!
To configure the IP address, subnet mask, and standard gateway of your device, go to the
PLEXUS menu 'Settings'
In Windows, please navigate to the corresponding item to change the network settings of your
operating system.
In general, these settings are recommended:
© 2011 inoage GmbH
'Network'. Or use the
MADRIX PLEXUS User Manual (English)
PLEXUS Configuration dialog.
97
43