MADRIX PLEXUS Handbuch Seite 56

56 MADRIX PLEXUS User Manual / Handbuch
Art-Net -> DMX 1 shows which Art-Net universe is assigned to the first XLR port for output (DMX
1).
Art-Net -> DMX 2 shows which Art-Net universe is assigned to the second XLR port for output
(DMX 2).
DMX 1 -> Art-Net shows which Art-Net universe is assigned to the first XLR port for input (DMX
1).
DMX 2 -> Art-Net shows which Art-Net universe is assigned to the second XLR port for input
(DMX 2).
Please change the Universe according to your requirements. Input will be send via Art-Net to the
configured Art-Net universe via Broadcast according to the configured IP address and Subnet
mask.
You may change the settings in this menu, on the device.
Configuring Art-Net-Remote
Activating Art-Net
In MADRIX, navigate to the menu 'Preferences' 'Device Manager' (or press 'F4'). Select the
tab 'Art-Net'.
Enable Art-Net here by activating the check-box in the upper left corner.
If you have enabled Art-Net inside this dialog, you will see at least one entry. The 'Art-Net
Remote' entry is automatically provided by MADRIX and you can use it for controlling MADRIX
remotely within the Art-Net network (Art-Net Remote).
© 2011 inoage GmbH