MADRIX PLEXUS Handbuch Seite 87

Removes a Scene. Select the particular Scene first.
Duplicates a Scene. Select the particular Scene first. Enter a new name for the copied
Scene in the second step.
In addition, please edit the following columns according to your requirements.
(Perform a double-click to change their values. Use Enter to apply your changes. Use Escape to
cancel.)
'#'' defines the number of the Scene. Simply enter a number.
'Name' defines the description of the Scene. Simply enter a name.
'File' defines the source of the Scene. Simply select another source (using a double-
click), if you wish to change it.
'Duration' shows how long the Scene is playing. This value cannot be changed.
'FPS' shows the frames per second of the record file. This value cannot be changed.
'Direction' defines which way the Scene is played. Applicable values are: 'Forward', 'Ping
Pong', 'Backward'. Ping Pong plays the Scene forwards first and automatically
plays it also backwards afterwards.
'Repeat' defines how often the Scene is repeated. Simply enter a number. A value of 0 will
be shown in the list as 'Endless', that means it will be repeated endlessly.
'Soft Loop' creates an automatic loop by the software. First, enter a number of frames.
MADRIX will add these frames to the end of the Scene and therefore loops towards
the first frame of your Scene. A cross-fade is created. For example, if your record
was set to a frame rate of 33 FPS and you enter 66 here, two seconds will be used
for a loop towards the first frame.
© 2011 inoage GmbH
MADRIX PLEXUS User Manual (English) 87