Control Panel; Speed Area; Rotation Area; Time Area - Hettich EBA 20 Bedienungsanleitung

EN
11

Control panel

The control panel is divided into four areas.
•
Speed
•
Rotation display
•
Time
•
Keys
RPM x 100

Speed area

Rotation area

11.1 Speed area
The speed area contains the speed display which indicates the preselected speed or the ACTUAL speed during
operation.
The speed can be preselected or changed during operation with the
display flashes in seconds until the lid is opened or a key is activated.
11.2 Rotation area
The rotation area contains the rotation display, which illuminates and rotates anti-clockwise whilst the rotor is turning.
When the symbols lights up, the rotor is stationary and the lid can be opened.
When the lid is unlocked, the
11.3

Time area

This area contains the running time display and the
preselected or changed during operation.
When stationary, the preselected switch-on time is displayed, as well as the remaining run time during operation. The
decimal point flashes each second during operation.
At the end of operation, the display flashes each second until the lid is opened or a key is activated.
11.4

Key area

Start key To start a run with the preselected parameters.
START
.
Stop key The STOP key allows a centrifuging run to be stopped at any time.
STOP
.
Pulse key Brief centrifuging whilst the key is pressed down.
The run time is displayed in seconds in the run time display.
After 60 seconds, the run time is displayed in minutes.
Lid key
After standstill the lid can be unlocked by pressing the corresponding key.
18/46
START
t
STOP
Time area Key pad
symbol lights up.
and
and arrow keys. At the end of operation, the
arrows, with which the switch-on time can be