Fuses And Cable Cross−Sections - Lenze 8200 motec Montageanleitung

efesotomasyon.com - Lenze
Fuses and cable cross−sections
Type Mains
2/PE AC;
E82MV251_2B 1/N/PE AC
E82MV371_2B 180 ... 264 V;
45 ... 65 Hz
1)
Use UL−approved cables, fuses and fuse holders only.
UL fuse: 240 V voltage, tripping characteristic "H", "K5" or "CC"
2)
Pulse−current or universal−current sensitive earth−leakage circuit breaker
Observe all national and regional regulations
When using earth−leakage circuit breakers, observe the following:
Earth−leakage circuit breakers must only be installed between mains
l
supply and controller.
Earth−leakage circuit breakers can trip incorrectly due to
l
– capacitive leakage currents of the cable shields during operation (
especially with long, shielded motor cables),
– simultaneous connection of several controllers to the mains supply.
Dimensioning of mains contactors
Type
E82MV251_2B
E82MV371_2B
Observe all national and regional regulations
1) e.g. current limiting module E82ZJ004
L
Mains connection / brake resistor
Installation to EN 60204−1
Fuse E.l.c.b.
M10 A C10 A
Rated current of mains contactor
With starting current limitation
10 A
EDK82MV371 DE/EN/FR 6.0
Electrical installation
Installation to UL
L1, L2, N, PE Fuse
2
[mm ]
1.5 10 A
1)
Without starting current limitation
4
1) 2)
E.l.c.b.
L1, L2, N, PE
[AWG]
³ 30 mA
16
20 A
93