efesotomasyon.com - Lenze
7
Commissioning
Parameter setting with the E82ZBB diagnosis terminal
Description
The diagnosis terminal is available as accessories. It consists of a rubber
housing in which the E82ZBC keypad is mounted. For connecting it to the
controller, a separate E82ZWL connection cable is required. A complete
description of the keypad is included in the Instructions supplied together
with the keypad.
Connecting the diagnosis terminal
Even during operation it is possible to connect the diagnosis terminal to the
AIF interface of the controller and disconnect it again.
As soon as the keypad is supplied with voltage, it carries out a self−test. The
keypad is ready for operation, when it is in display mode.
L
101
EDK82MV371 DE/EN/FR 6.0