Safety Instructions; Lenze Controllers - Lenze 8200 motec Montageanleitung

efesotomasyon.com - Lenze
1

Safety instructions

Lenze controllers

General safety and application notes for Lenze controllers
(According to: Low−Voltage Directive 73/23/EEC)
General
Lenze controllers (frequency inverters, servo inverters, DC controllers) can
include live and rotating parts − depending on their type of protection − during
operation. Surfaces can be hot.
Non−authorized removal of the required cover, inappropriate use, incorrect
installation or operation, creates the risk of severe injury to persons or
damage to material assets.
For more detailed information please see the documentation.
All operations concerning transport, installation, and commissioning as well
as maintenance must be carried out by qualified, skilled personnel (IEC 364
or CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110
and national regulations for the prevention of accidents must be observed).
According to this basic safety information qualified skilled personnel are
persons who are familiar with the installation, assembly, commissioning,
and operation of the product and who have the qualifications necessary for
their occupation.
Application as directed
Drive controllers are components which are designed for installation in
electrical systems or machinery. They are not to be used as household
appliances. They are intended exclusively for professional and commercial
purposes according to EN 61000−3−2. This documentation includes
information about the compliance with the limit values to EN 61000−3−2.
When installing the drive controllers in machines, commissioning (i.e.
starting of operation as directed) is prohibited until it is proven that the
machine complies with the regulations of the EC Directive 98/37/EC
(Machinery Directive); EN 60204 must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when
there is compliance with the EMC Directive (89/336/EEC).
The drive controllers meet the requirements of the Low−Voltage Directive
73/23/EEC. The harmonised standards of the series
EN 50178/DIN VDE 0160 apply to the controllers.
The technical data and information on the connection conditions must be
obtained from the nameplate and the documentation. They must be
observed in any case.
Warning: The availability of controllers is restricted according to
EN 61800−3. These products can cause radio interferences in residential
areas. In this case, special measures are required.
L
69
EDK82MV371 DE/EN/FR 6.0