Preparations - Lenze 8200 motec Montageanleitung

efesotomasyon.com - Lenze
1a
1a
Motor preparation:
Remove terminal box seal 0 and motor terminal board.
l
If necessary, extend the motor cable.
l
Mount the carrier housing to the motor:
If required, use the distance and wall mounting plate (2) and the terminal box seal 0.
l
l The mounting and fixing must ensure a permanently tight mechanical connection, for instance by using
serrated lock washers 1.
Perfect sealing is required to ensure enclosure IP65.
L
A
Fig. 18
EDK82MV371 DE/EN/FR 6.0
Motor mounting

Preparations

2
A
M20 M16
4 × 2 ×
3
B
3.4 Nm
30 lb-in
1a
−12−8200mot053
89