Wiring According To Emc Requirements - Lenze 8200 motec Montageanleitung

3
motec with motor or geared motor

Wiring according to EMC requirements

Conditions for trouble−free operation:
Except for the mains cable, use shielded cables only.
l
The shield must be carefully connected to PE.
l
Connect motor and mains PE conductors to separate PE terminals.
l
X1
A
0
Mains cable L1, N, PE or L1, L2, PE
1
PE connection − mains cable
2
Shielded control cable
3
Shield connection − control cable: fix the shield with cable binder to the sheet
4
Function module
X1 Terminal strip − mains connection
PES HF screen termination by PE connection with a surface as large as possible
82
efesotomasyon.com - Lenze
B
I
EDK82MV371 DE/EN/FR 6.0
Shield connection
1. Prepare cable
2. Insert the cable tie
3. Lay cable into the
cable tie and tighten
D
it. The shield must be
tightly connected to
the shield sheet.
C
8200mot151
L