Cleaning And Sterilizing The Unit Surface; Recommended Instrument Disinfectants; Recommended Surface Disinfectants - ATMOS Record 55 Gebrauchsanweisung

5.0
5.3 Cleaning and sterilizing the unit
surface

Always disconnect the device from the power line, before
cleaning and disinfecting the surface.

Wipe the surface clean with a cloth soaked in a cleaning
solution or disinfectant. Liquids must not enter the device.
All of the cleaning solutions and disinfectants listed below
can be used.

Should liquids have penetrated into the device, it must
be inspected by an authorized service technician before
being used again.

Recommended instrument disinfectants

Disinfectant
GIGASEPT FF
(concentrate)
Sekusept PLUS
(concentrate)
Mucozit-T
(concentrate)

Recommended surface disinfectants

Disinfectant
TERRALIN
(Concentrate)
QUATOHEX
(Concentrate)
Incidin Plus
(Concentrate)
Pursept-A
(Disinfectant spray or
disinfectant cloths)
30
UK
Ingredients
succinic acid dialdehyde
dimethoxy tetrahydrofurane
corrosion protection components
non-ionic tensides and odoriphores
glucoprotamine
non-ionical tensides
dissolvents, complexing agents
bi3 (3-aminoprophyl)laurylamine
alkyldimethylbenzylammoniumchloride
cocospropylendiamine-1,5 guanidinium-acet.
Ingredients
Benzal conium chloride
Phenoxypropanole
Didecyl dimethyl
ammonium chloride
Benzal conium chloride
Bi-guanidinium acetate
Polymer biguanid
Cleaning agents
Glucoprotamin
Nonionic tensides
Solvents, complexing agents
Ethanol
Glyoxal
QAV
F
(in 100 g) Manufacturer
11.0 g Schülke & Mayr, Norderstedt
3.0 g
25.0 g Henkel, Düsseldorf
8.0 % Merz & Co., Frankfurt/Main
19.0 %
7.0 %
(in 100 g) Manufacturer
20 g Schülke & Mayr, Norderstedt
35 g
Braun, Melsungen
14 g
10 g
7,5 g
0,5 g
26,0 g Henkel, Düsseldorf
38,9 g Merz & Co., Frankfurt/M.
0,1 g
0,05 g

Page 30