Cleaning The Unit's Surfaces; Evacuating The Collection Jar; Cleaning The Collection Jar Parts - ATMOS LC 16 Gebrauchsanweisung

Fig. 5.

6.1.1 Cleaning the unit's surfaces

If liquid has got into the unit, it may not be operated
again until it has been checked by the authorised
customer service centre.
 The surfaces of the ATMOS LC 16 are resistant to all the
surface disinfectants listed on page 12.
 The unit itself can be wiped off with a moist cloth (not
wet).
6.2

Evacuating the collection jar

 Remove connecting hoses (suction hose and con-
necting hose on the unit, fig. 5).
 Lift out collection jar with lid.
 Remove collection jar lid.
 The collection jar can then be evacuated.
 Properly dispose of the sucked material.

6.2.1 Cleaning the collection jar parts

 Collection jar and collection jar lid may be rinsed under
running water or cleaned in an automatic cleaning
device.
Using the cleaning agent Neodisher AN (manufactured by
Dr. Weigert, Hamburg) cleaning in a special dish-washer
is also possible. The disposable bacterial filter plate (fig.
6, page 13) must be removed before cleaning.
English
11