Lock-Doors Function; Command; Central Keypad; Time And Weekday - effeff D 00080 Bedienungsanleitung

--- Enter command number >>> 03
(command door monitoring).
--- Confirm entry by pressing the
>>> key ENT .
The information tu 0 appears in
the display box, standing for door
monitoring function not activated
or tu 1 , standing for door
monitoring function activated.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming pad of the door
coding systems.
--- If the number >>> 0 is entered
(door monitoring function not
activated) and confirmed by
>>> key ENT , 2 free digits
then appear in the display box
which are occupiable by the
entry of a new command
number.
------ Command numbers
(see page 12) -------------
-- If no new comand numbers are
entered, programming can be
terminated by confirmation of
the >>> keys ENG and
subsequently the >>> key •
(normal operating mode).
--- If activation status >>> 1 is
entered (door monitoring function
active) programming can be
continued as described in the
following.
--- Confirm entry by pressing the
>>> key ENT .
The information door monitoring
period appears in the display
box, e.g. tu 99 . After this
monitoring period the erroneous
code relay is triggered (message:
door open too long). 99 secs. are
programmed ex-factory.
--- If a different door monitoring
period is desired, a two digit num-
ber has to be entered between
01 and 99 secs. via the numeric
programming pad (overwriting the
stored door monitoring period).
--- Confirm entry by pressing the
>>> key ENT .
-*- 2 free digits appear in the display
box, which are occupiable by the
entry of a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of
the >>> key ENG and
subsequently of the key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
14
Programming:

Lock-doors function

(command 04)

As the term already defines only one
of two doors can be opened at any
one time via the code number or by
means of a door opening pushbutton.
As long as a door remains open, the
door's counterpart remains locked.
Programming procedure:
setting of the additional functions
lock-doors operating mode
(programming of the additional func-
tion lock-doors operating mode can
be effected on channel 1 or channel
2, entry applies, however, at all times
to both channels).
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate
>>> key Door 1 or Door 2 .
The stored code number
appears in the display box.
--- Press the additional function key
>>> ENG . 2 free digits are mar-
ked by points in the display box.
--- Enter command number >>> 04
(command lock-doors function).
--- Confirm entry by pressing the
>>> key ENT . The information
SF 0 appears in the display
box, standing for lock-doors
functions not activated or SF 1
for lock-doors functions activated.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming box of the door
coding systems.
--- If the number >>> 0 or 1 is
entered and confirmed by >>>
key ENT , 2 free digits appear
in the display box, which can be
occupied by a new command
number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of
the >>> key ENG and
subsequently of the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
Programming:

Central keypad

(command 05)
When the additional function central
keypad is activated both channels
are controlled by keypad 1. No entry
is possible via keypad 2.
Programming procedure:
setting of additional function central
keypad
(programming of the additional func-
tion central keypad can be effected
on channel 1 or channel 2, but entry
always applies to both channels).
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears
in the display box.
--- Press additional function key >>>
ENG . 2 free digits are marked
by points in the display box.
--- Enter command number >>> 05
(command central keypad).
--- Confirm entry by pressing the
>>> key ENT . The information
Zt 0 appears in the display box,
standing for central keypad not
activated or Zt 1 , standing for
central keypad activated.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming box of the door
coding systems.
--- If the number >>> 0 or 1 is en-
tered and confirmed by >>> key
ENT , 2 free digits appear in the
display box, which are occupiable
by a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> key ENG and
subsequently of the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
Programming:

Time and weekday

(command 10)
Programming procedure:
setting of current time and the current
weekday
(The time and weekday are pro-
grammable on channel 1 or channel
2, however, entry is valid at all times
for both channels).
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears