Continuously Locked Periods - effeff D 00080 Bedienungsanleitung

(possibly overwriting displayed
time).
--- Confirm entry by pressing the
>>> key ENT .
The weekday appears in the
display box, e.g. t = 0 on
which the previously programmed
continuously unlocked period is
to be valid.
t = 0 signifies on all days
t = 1 signifies only on Monday
t = 2 signifies only on Tuesday
.
.
t = 7 signifies only on Sunday
--- Enter desired weekday number
via the numeric programming pad
(possibly overwriting displayed
weekday).
--- Confirm entry by pressing the
>>> key ENT .
-*- The information A (time) appears
in the display box, standing for
the starting time of the second
continuously unlocked period.
-*- The programming procedure now
repeats itself starting from the
above designated programming
step (>1<), until all 10 continuously
unlocked period storage locations
have been programmed.
Once the weekday number of the
10th continuously unlocked period
has been confirmed by means
of the >>> key ENT , 2 free
digits appear in the display box,
which are occupiable by the entry
of a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
Programming:

Continuously locked periods

(command 16)
The continuously locked door facility
makes possible the time-dependent
locking of the corresponding door
code channels.
10 continuously locked periods are
available per channel. Each locked
period is programmable for a certain
weekday. If day 0 is entered when
programming the week, continuous
locking is valid on all days (block
formation possible).
If a continuously unlocked period
overlaps a continuously locked
16
period, the locked period has pre-
cedence.
Programming procedure:
setting of continuously locked periods
channel 1 = door 1
channel 2 = door 2
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears
in the display box.
--- Press additional function key
>>> ENG .
2 free digits are marked by points
in the display box.
--- Enter command >>> 16
(command continuously unlocked
period).
--- Confirm entry by pressing
>>> key ENT . The information
dV 0 , standing for continuously
locked period not activated or,
dV 1 , standing for continuously
locked period activated, appears
in the display box.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming pad of the door
coding systems.
--- If the number >>> 0 is entered
(continuously locked period not
activated) and confirmed by
>>> key ENT , 2 free digits
appear in the display box, which
are occupiable by entry of a new
command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> keys ENG and
subsequently the >>> key •
(normal operating mode).
--- If activation status >>> 1 is
entred (continuously locked
period active), programming can
be continued as described in the
following.
-*- 10 storage locations are available
for the continuously locked door
period (-1- first storage location).
The starting and finishing time of
the continuously locked period is
hereby programmable relative to
the weekday. When programming
a continuously locked period
all 10 storage locations have to
keyed through.
All data can be overwritten or
reset to 0000 by means of the
>>> key CE . All entries or
confirmations are to be confirmed
by means of >>> key ENT .
--- Confirm entry by pressing the
>>> key ENT .
The information A (time)
appears in the display box,
standing for the starting time of
the first continuously locked
period.
>1< Enter desired starting time,
4 digits in hours and minutes,
(possibly overwriting displayed
time).
--- Confirm entry by pressing the
>>> key ENT .
The information E (time)
appears in the display box, stan-
ding for the finishing time of the
first continuously locked period.
--- Enter desired finishing time,
4 digits in hours and minutes, via
the numeric programming pad
(possibly overwriting displayed
time).
--- Confirm entry by pressing the
>>> key ENT .
The weekday appears in the
display box, e.g. t = 0 on
which the previously programmed
continuously locked period is to
be valid.
t = 0 signifies on all days
t = 1 signifies only on Monday
t = 2 signifies only on Tuesday
.
.
t = 7 signifies only on Sunday
--- Enter desired weekday number
via the numeric programming pad
(possibly overwriting displayed
weekday).
--- Confirm entry by pressing the
>>> key ENT .
-*- The information A (time) appears
in the display box,standing for
the starting time of the second
continuously locked period.
-*- The programming procedure now
repeats itself commencing from
the above designated program-
ming step (>1<), until all 10 con-
tinuously locked period storage
locations are programmed.
Once the weekday number of the
10th continuously locked period
has been confirmed by means of
the >>> key ENT , 2 free digits
appear in the display box, which
are occupiable by the entry of a
new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>>key ENG and subsequently