Herunterladen Inhalt Inhalt Diese Seite drucken

Mounting And Installation; Security Regulations; Different Versions Of The Lock - effeff 809 Montageanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2

Mounting and Installation

2.1

Security Regulations

• When installing an effeff security lock 809, it is absolutely necessary that the
following security regulations are observed in order to avoid damages to the
lock or dangers for the user.
• Do not modify the lock in any way!
• Do not remove the foils covering the cylinder cutout before the cylinder is
mounted, as they prevent dirt penetrating the lock.
• Attention! While installing the lock, take care that the door cannot be closed
nor closes by itself. Do not forget that this lock is locked automatically and that
from the outside it can only be opened by means of the key, if it is not energi-
zed.
• When selecting and mounting the faceplate, which is fitted as a mating part of
the lock, make sure that the control latch of the lock cannot be extended when
the door is closed.
• The lock must be installed without strain. All dimensions and angles indicated
must be observed.
• Attention! The lock must be installed in accordance with the Building Inspec-
tion Authority requirements or equivalent in the country of use and in accor-
dance with the regulations of the door manufacturer!
2.2

Different Versions of the Lock

handle with panic function
electrically controlled handle
All locks are marked on the label.
The last (15th) figure of the type number indicates the version of the lock in accordance with the
above drawings.
Attention: Only version F and D are panic doors according to the general regulations.
C
F
The version of the lock has to be determined according to the
opening direction of the door and to whether the inner performs
the panic function and the outer handle is electrically controllable
or vice versa.
34
E
D

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis