Befehl; Night Code - effeff D 00080 Bedienungsanleitung

the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
Programming:

Night code

(command 17)
A second code number is assignable
to each door. The validity period
(starting time, e.g. 20.00 hours and
finishing time, e.g. 06.00 hours) has
to be entered via the numeric pro-
gramming pad.
Programming procedure:
setting of night code
channel 1 = door 1
channel 2 = door 2
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select channel, actuate >>> key
Door 1 or Door 2 .
The stored code number appears
in the display box.
--- Press additional function key
>>> ENG .
2 free digits are marked by points
in the display box.
--- Enter command >>> 17
(command night code).
--- Confirm entry by pressing >>>
key ENT .
The information nc 0 , standing
for night code not activated
or, nc 1 , standing for night
code activated, appears in the
display box.
--- Enter desired activation status
>>> 0 or 1 via the numeric
programming pad of the door
coding systems.
--- If the number >>> 0 is entered
(night code not activated) and
confirmed by >>> key ENT ,
2 free digits appear in the display
box, which are occupiable by the
entry of a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- If activation status >>> 1 is
entered (night code active),
programming can be continued
as described in the following.
--- Confirm entry by pressing the
key ENT .
The stored night code number
appears in the display box.
--- Delete night code number, press
>>> key CE . 6 free digits are
marked by points in the display
box (preset ex-factory).
--- Enter desired night code number
via the numeric programming pad
of the door coding system.
A random night code number of
up to a maximum of 6 digits is
available for selection.
--- Confirm entry by pressing the
>>> key ENT .
The information A (time)
appears in the display box,
standing for the starting time of
the night code.
--- Enter desired starting time,
4 digits in hours and minutes,
(possibly overwriting displayed
time).
--- Confirm entry by pressing the
>>> key ENT .
The information E (time)
appears in the display box,
standing for the finishing time of
the night code.
--- Enter desired finishing time,
4 digits in hours and minutes
(possibly overwriting displayed
time).
--- Confirm entry by pressing the >>>
key ENT .
2 free digits appear in the display
box, which are occupiable by the
entry of a new command number.
------ Command numbers
(see page 12) -------------
--- If no new command number is
entered, programming can be
terminated by confirmation of the
>>> key ENG and
subsequently the >>> key •
(normal operating mode).
--- Turn key-operated switch to
operating position.
17