Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
-*-Programming switch position:
S1 and S2 ON
basic function
short unlocked period
-*- Programming switch positions:
S 1 ON
and S 2 OFF
function short unlocked period
with continuous unlocked period
via keypad (for further details
see page 12).
--- Close appliance cover
--- Turn key-operated switch to
operating position
Key to symbols:
--- Programming steps to be carried out
-*- Instructions
>>> Actuation of following key
Programming:
Door unlocked period
-*- A door unlocking period of 07
secs. is programmed ex-factory
for door 1 and door 2.
Programming procedure:
setting of door unlocked period
channel 1 = door 1
channel 2 = door 2
--- Turn key-operated switch to
programming position.
--- Slide porgramming switch
>>> S 1 and S 2 to position
OFF
. The appliance has to be
opened for this purpose;
The programming switches S 1
and S 2 are located on the main
board.
--- Select channel, actuate
>>> key Door 1 or Door 2 .
The stored door unlocked period
appears in the display box.
--- If another door unlocked period
is desired, a two digit number
between 01 and 99 secs. has to
be entered via the numeric
programming pad (overwriting the
stored door unlocked period).
--- If an existing, stored door
unlocking period is to be
confirmed or the programming
procedure terminated, to
conclude the >>> key •
(normal operating mode) has to
be pressed in both cases.
--- Place the programming switch
>>> S 1 and S 2 in the
desired switching position.
-*- Programming switch position:
S 1 and S 2 ON
basic function
short unlocked period
-*- Programming switch position:
S 1 ON
and S 2 OFF
basic function short period
release with continuous
12
unlocked period via keypad
(for further details see page 12).
--- Close appliance cover
--- Put key-operated switch in
basic
operating position
Programming:
Function
Keypad-controlled
continuously
unlocked door
The doors can be continuously un-
locked by actuating the plus keys
and subsequent entry of the code
number via the keypads. The possi-
bility thus exists of accessing these
doors as often as desired. In order to
reset the free accessibility of the
doors, first of all the minus key and
then the code number has to be
entered via the keypads.
If the plus key is not confirmed via
the keypads the basic function (short
unlocked period) is effective upon
entry of the correct code number.
-*- Ex-factory the basic function
(short unlocked period) is preset
for door 1 and door 2.
(S 1 and S 2 ON
Programming procedure:
setting of the continuously unlocked
door period; this function is effective
generally for both channels or doors.
--- Turn key-operated switch to
programming position and open
door coding device.
--- Slide pogramming switch >>>
S 1 to ON
to OFF
position.
-*- The programming switches S 1
and S 2 are located on the main
board.
--- Close appliance cover
--- Put key-operated switch in
operating position
Additional functions
The following additional functions are
only included in the case of the door
coding control device model 451-10.
Furthermore, the control device has
to be fitted with a 12 V/5,7 Ah accu-
mulator (no. 18 004).
Command numbers
No. Function
01
Alarm code
02
Erroneous code
03
Door monitoring
04
Lock-doors function
05
Central keypad
10
Time and weekday
setting
11
15
16
17
The command codes 06 – 09 and
12 – 14 are not assigned.
Caution!
During programming procedures for
additional functions the sliding
switches >>> S 1 and S 2 must be
located in the ON
function) or >>> S 1 in the ON
position and S 2 in the OFF
tion (basic function with continuously
unlocked facility)!
Programming:
Alarm code
(command 01)
By means of the alarm code the door
is both unlocked and simultaneously
an alarm is triggered at the central
control unit (silent alarm). By this
means the central unit is alarmable
unnoticed, e.g. in the event of forced
)
access.
The alarm code is identical with the
respectively valid door code, with
the exception of the last digit. If alarm
is required to be activated, the last
figure is raised by 2.
I.e. if the last digit is 7,
position and S 2
Programming procedure:
setting of the alarm code
--- Turn key-operated switch to
programming position. The time
appears in the display box.
--- Select the channel, actuate
>>> key Door 1 or Door 2 .
The stored code number
appears in the display box.
--- Press additional function key
>>> ENG .
2 free digits are marked by
points in the display box.
--- Enter command number >>> 01
Page
(command alarm code).
--- Confirm entry by pressing the
12 – 13
>>> key ENT .
13
The information AC 0 appears
13 – 14
in the display box, standing for
14
alarm code not activated or
14
14 – 15
activated.
Summertime/
15
standard time
Continuously
15 – 16
unlocked periods
Continuously
16 – 17
locked periods
Night code
17
position (basic
the alarm digit is 9.
If the last digit is 9,
the alarm digit is 1.
channel 1 = door 1
channel 2 = door 2
AC 1 , standing for alarm code
posi-
Werbung
Inhaltsverzeichnis
