Motor either doesn't start or starts but then stops
Possible cause:
•
Wrong starting procedure.
•
Wrong carburetor adjustment.
•
Dirty spark plug.
•
Clogged fuel filter.
Corrective measures:
•
Follow the instructions in the operating manual.
•
Have the carburetor adjusted in a professional service shop.
•
Clean or exchange the spark plug.
•
Exchange the fuel filter.
Device starts, but with reduced performance
Possible causes:
•
Wrong setting of the choke lever.
•
Dirty spark catching mesh.
•
Dirty air filter.
•
Wrong carburetor adjustment.
Corrective measures:
•
Set the choke switch to "OPEN".
•
Exchange spark-catching mesh.
•
Remove air filter, clean it and put it back in.
•
Have the carburetor adjusted in a professional service shop.
Motor performance reduced/ motor does not perform
Possible cause:
•
Wrong carburetor adjustment.
Corrective measures:
•
Have the carburetor adjusted in a professional service shop.
Motor runs irregularly
Possible cause:
•
Wrong spark path.
Corrective measures:
•
Clean or exchange spark plug.
Motor emits excessive smoke
Possible causes:
•
Wrong carburetor adjustment.
•
Wrong fuel mix.
Corrective measures:
•
Have the carburetor adjusted in a professional service shop.
•
Use a correct mixture (40:1).
1130223-1130224 BDA GB 1/38 BT - 1/44-23 MS.indd 41
41
13.09.12 15:48