Assembling The Appliance; Attaching / Removing The Cleaning Head And Nozzles - Cleanmaxx JJ-SC-005B Gebrauchsanleitung

Assembling the appliance

ATTENTION!
❐ Danger of electrocution! During assembly and / or disassembly the appliance must not be
connected to the power supply and must have cooled off.
1. Carefully place all accessories on a level surface. As a precautionary measure, set down a
protective foil to prevent any damage to sensitive surfaces.

Attaching / removing the cleaning head and nozzles

2. Insert the handle end piece (C) in the handle bar (B). If applicable,
depress the catch on the handle end piece so that it fi ts into the handle
bar. The catch must lock into the handle bar opening. Turn the handle
back and forth for this.
3. Insert the end of the handle bar in the top opening of the main unit (A).
The handle bar must audibly lock into place.
To remove the handle bar depress the release button (14) and pull the
handle bar out at the same time.
4. Turn the top hook for winding up the cord (2) up and the bottom one
down and wind the power cord around both hooks.
In order to quickly unwind the power cord again, turn the top hook of
the cord spool down.
• Insert the end piece of the cleaning head (N) in the steam nozzle (9) of
the main unit until the catch locks into the opening next to the steam
nozzle.
23