Prior To Fi Rst Use; Assembling The Device - Cleanmaxx jj-sc-005b Gebrauchsanleitung

Prior to fi rst use
ATTENTION!
■ Danger of suffocation! Keep the packaging material away from children and animals.
1. Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damages from transport. If any components
are damaged, do not use them (!). Instead contact the customer service department.
2. Pull any foils and / or stickers off of the device and accessories.
3. Assemble the device (see chapter "Assembling the device").
NOTICE: Water residue in the tank is attributed to previous testing of the device.

Assembling the device

ATTENTION!
■ Danger of electrocution! During assembly and / or disassembly the device must not
be connected to the power supply and must have cooled off.
1. Carefully place all accessories on a level surface. As a precautionary measure, set
down a protective foil to prevent any damage to sensitive surfaces.
23
2. Insert the handle end piece (C) in the handle bar (B). If
applicable, depress the catch on the handle end piece so
that it fi ts into the handle bar. The catch must lock into
the handle bar opening. Turn the handle back and forth
for this.
3. Insert the end of the handle bar in the top opening of the
main unit (A).The handle bar must audibly lock into place.
EN