Storage; Troubleshooting - Cleanmaxx JJ-SC-005B Gebrauchsanleitung

• If necessary, wipe off the main unit, handle bar, and handle with a soft, damp cloth and dry them
with a soft cloth.
• Rinse the dirty nozzles with luke warm water and if necessary, with a mild cleaner. Allow them
to air dry.
• The fl oor pad can be washed in the washing machine. Be sure to observe the notes on the
washing label. Do not use any softeners or bleaching agents!

Storage

ATTENTION!
❐ Scalding hazard! Always let the appliance to cool off completely before you store it.
❐ Empty the water tank completely before you store the appliance.
❐ Do not subject the appliance to extreme temperatures, severe changes in temperature, direct
sunlight or moisture.
• Store the appliance in a frost-free, dry, clean, cool area that is not accessible to children or
animals.
• Prior to using the appliance again, the water tank should always be checked for residual water
and be completely emptied if necessary.

Troubleshooting

If the appliance is not working properly, please check whether you are able to rectify the problem
yourself fi rst. Otherwise contact the customer service department.
Do not attempt to repair a defective appliance yourself.
Problem
The handle and
the handlebar do
not fi t together/
the handle does
not lock into
place.
The appliance is
not working. /
The power
LEDs are not
illuminating.
Potential cause / solution
• It is possible that the cable winder becomes twisted at the handle
during the production process. This prevents the handle from
locking into the handlebar. Turn the cable winder slightly at the
handle until the handlebar fi ts directly into the opening. When the
latch locks into place, the handle has been securely connected with
the handlebar.
• Is the plug properly connected with the socket?
• Is the socket defective?
Try another socket.
• Check the fuse for your mains connection.
28