Before Using For The First Time; Unpacking; Assemble The Stand For The Floor Steam Cleaner; Use - Cleanmaxx Mega Power SM102K Gebrauchsanleitung

Before using for the first time

Before using the appliance you must:
• unpack the purchased parts,
•

assemble the stand for the floor steam cleaner.

unpacking

CAutIoN!
❐ Keep children away from the packaging material. It represents a hazard, including risk of
suffocation.
• Unpack all the parts and check the purchased parts for completeness (see "Purchased
parts") and for transport damage. If there is damage to any of the parts, do not use
them(!); contact customer services instead.
Assemble the stand for the floor steam cleaner.
The stand for the floor steam cleaner is supplied in three parts: the handle (18), the middle
piece (14) (with base unit), and the cleaning head (6).

use

CAutIoN!
❐ Always check the floor cleaning cloth for wear before each use. It must not be used if it
is visibly worn or damaged. This could result in damage to your floor covering.
❐ The steam cleaner should only be used with floor cleaning cloths specifically manufac-
tured for it.
❐ When cleaning, ensure that the floor cleaning cloth is firmly attached to the cleaning
head in order to avoid damage to the appliance or floor covering.
01168_DE-GB-FR-NL_V0.indd 19
1. Insert the handle onto the middle piece and screw both
parts together. To do this, insert the screw supplied into
the side hole of the handle (and middle piece) and turn
it.
2. Insert the steam outlet nozzle at the bottom end of the
middle piece into the adapter of the cleaning head. You
must hear it click into place.
3. To put the appliance away, wind the power cable (10)
loosely around the top and bottom hooks provided for
holding the cable.
• If you want to remove the cleaning head, press the unlatching
lever (15) where the cleaning head joins the middle piece and
remove it.
19
26.05.11 12:01