Before Fi Rst Use; Assembling The Device - Cleanmaxx JC-210 Gebrauchsanleitung

Before fi rst use
❐ Risk of suffocation! Keep the packaging material away from children and animals.
1. Unpack all parts and make sure that the scope of delivery is complete (see chapter
"Device overview and scope of delivery") and check for any damages from transport.
If you identify damages to the components, do not use them (!), instead contact our
customer service centre.
2. Pull any foils or stickers off of the device and accessories.
3. Assemble the device (see chapter "Assembling the device").

Assembling the device

❐ Danger of electrocution! During assembly and/or disassembly the device must not be
connected to the mains supply and must have cooled off.
1. Carefully place all accessories on a level surface. As a precautionary measure, set
down a protective foil to prevent any damage to sensitive surfaces.
Downloaded from www.Manualslib.com
ATTENTION!
NOTICE: Water residue in the tank is attributed to previous testing of the device.
ATTENTION!
2. If the main unit (9) is inserted in the main unit frame (8)
upon delivery, release the locking tab (5) on the main unit.
3. Push the release button (18) to remove the main unit up
and take the main unit (9) off of the main unit frame (8).
manuals search engine
27