Configuring An Automatically Created Account As The Standard Voip Account For An Auerswald Pbx - Auerswald COMfortel 3500 Inbetriebnahmeanweisungen

3.
Tap on IP address.
4.
Enter a permanent IP address for the telephone.
Tip: The entry can be made either via the digit keys or by tapping several
times or by clicking and holding the + and - buttons.
5.
Tap on OK.
6.
Tap on Net mask.
7.
Enter a subnet mask for the telephone.
8.
Tap on OK.
9.
Tap on Gateway.
10.
Enter a gateway for the telephone.
11.
Tap on OK.
12.
Tap on DNS server 1.
13.
Enter a DNS server for the telephone.
14.
Tap on OK.
15.
Press the Home key to get to the start page.
16.
Tap on No account configured.
17.
Proceed with
Configuring an Automatically Created Account as the Standard
VoIP Account for an Auerswald PBX
Requirements
– Setup assistant started (All apps > Settings > Setup assistant)
– Account displayed under Inactive or unregistered accounts (e.g.
Account 001)
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
The message No account configured is shown on the display.
The setup assistant is automatically started.
Step 5. on page
Commissioning
51.
53