Preparation; Connections At The Back; Preparing The Telephone For Use As Desktop Unit - Auerswald COMfortel 1200 Anleitung

Preparation

This section describes the preparations required before commissioning the device. This
includes adjusting the height and connecting the receiver and a headset (not included in the
package). Furthermore, this includes installing the telephone in a suitable location or mount-
ing it on a wall.

Connections at the Back

Fig. 9: Sockets
A Receiver socket
B Headset socket (only COMfortel 1400)
C MicroSD/SDHC card socket (only functional on the COMfortel 1400)
D ISDN cable socket

Preparing the Telephone for Use as Desktop Unit

Requirements
– The feet of the casing delivered with the telephone
1.
Assemble the feet of the casing in the required position (see
page
Note: The feet can be assembled in three different positions.
2.
Push the feet inward up to the stop.
40
Preparation
41).
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014
Fig. 10 on