Adjust Pressure Control - Storch Airless EasySpray ES 300 Bedienungsanleitung

c.Turn the arrow shaped handle on the spray tip forward
to the spray position.
4. Screw spray tip assembly onto the gun and tighten it
by hand. The tip holder can be aligned vertically or hori-
zontally depending on the coating surface.

Adjust Pressure Control

The pressure regulator enables continuous pressure adjustments. Always set it to the lowest pressure setting to pre-
vent overspray and increase the pressure to the minimum setting to achieve ideal spray patterns.
Recommended working pressure:
High spray pressure with
large tip openings and
coating substances with
increased viscosity
Coating substance:
Emulsion paints
For interiors/exteriors
Recommended tip sizes:
0.015"
0.017"
0.019"
Align symbol on pressure regulator with setting indicator on sprayer.
Medium spray pressure for
small to medium-sized tip
openings and coatings with
low to medium viscosity
Water/solvent-based
paint, primer
0.007" to 0.013"
Filling/ Low spray pressure to apply paint using the
cleaning LeOS system (spray pressure adjustable depen-
ding on the material)
Emulsion paints
For interiors/exteriors
LeOS spray application with re-rollers and
LeOS spray roller (0.017" to 0.021")
155 Original instruction