Emptying The Container; Replacing The Filter Element - Stihl SE 122 Gebrauchsanleitung

Emptying the container

2
1
N
Switch off machine
N
Pull mains plug from socket.
N
Release the spring catches (1).
N
Lift the upper part of the vacuum
cleaner (2) vertically up and off.
When dry-vacuuming without filter
bag and when wet-vacuuming:
N
Empty the container and dispose of
its contents in accordance with the
applicable regulations.
N
Continue with: Fitting the upper part
of the vacuum cleaner
SE 122, SE 122 E
When dry-vacuuming with filter bag
1
N
1 Carefully remove the filter bag (1)
from the container and dispose of it
in accordance with the statutory
regulations.
N
Pull filter bag sleeve off intake port
and seal opening in filter bag sleeve
with slide (2).
N
Push filter bag sleeve onto intake
port as far as possible.
N
Insert new filter bag (3) (instructions
on filter bag)
Fitting the upper part of the vacuum
cleaner
N
Clean the edge of the container.
N
Fitting the upper part of the vacuum
cleaner
N
Clean the sleeve and intake port
before fitting the suction hose.

Replacing the filter element

2
N
Pull mains plug out of socket.
3
N
Remove upper part of vacuum
cleaner and turn it over.
N
Unscrew supporting cage for
filter (1).
N
Remove filter element (2) and
dispose of it in accordance with the
statutory regulations.
N
Fit new filter element in the reverse
sequence of steps.
N
Check correct operation of the float:
the float must move easily when the
supporting cage for the filter is
turned over.
N
Fitting the upper part of the vacuum
cleaner
English
1
2
23