Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 Removing and Fitting the Battery
Attaching and Removing the Brush Attachment
1
2
Removing the brush attachment:
► Depress the retaining latch (1) and hold it
depressed.
► Remove the brush attachment (2).
Attaching the brush attachment:
► Push the brush attachment (1) into the guides
at the suction nozzle as far as it will go.
The brush attachment engages in position with
an audible click.
8
Removing and Fitting the
Battery
8.1
Fitting the Battery
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages in position with a
click.
8.2
Removing the Battery
1
► Depress both locking hooks (1).
The battery (2) is unlocked and can be
removed.
0458-006-9621-B
2
1
2
9
Switching the hand vac‐
uum on and off
9.1
Switching on the hand vacuum
► Hold the hand vacuum firmly with one hand on
the control handle – wrap your thumb around
the control handle.
► Press the trigger (1) with your index finger and
keep depressed.
The hand vacuum accelerates, and the
sweepings are sucked in.
9.2
Switching off the hand vacuum
► Release the trigger.
The vacuum shredder stops sucking in the
sweepings.
► If the vacuum shredder continues to suck in
sweepings: Remove the battery and consult a
STIHL specialist dealer.
The hand vacuum is defective.
10 Checking the Hand Vac‐
uum and the Battery
10.1
Checking the controls
Trigger
► Remove the battery.
► Press the trigger.
► If the trigger is stiff or does not spring back to
its idle position: Do not use your hand vacuum
and contact your STIHL servicing dealer for
assistance.
The trigger is defective.
Switching on the hand vacuum
► Insert battery.
► Press and hold the trigger.
The sweepings are sucked in.
► If 3 LEDs flash red: Remove the battery and
consult a STIHL dealer.
There is a fault in the hand vacuum.
► Release the trigger.
The vacuum shredder stops sucking in the
sweepings.
English
1
29
Werbung
Inhaltsverzeichnis
Fehlerbehebung
