Stihl SE 122 Gebrauchsanleitung Seite 21

STIHL recommends the use of genuine
STIHL parts and accessories. These
have been optimized for the product and
the user's requirements.
The machine may only be used when all
parts are in perfect working order.
Inspect the power cord regularly for
signs of damage and ageing. Never use
the machine if the power cord is
damaged – Danger of electrocution!
Unsuitable extension cords may be
dangerous.
When using extension cords, ensure
that the minimum conductor cross-
sections are maintained – see
"Connecting the machine to the power
supply".
When using extension cords, the
connector and coupling must be
waterproof or routed in such a way that
they cannot come into contact with
water.
The power cord may only be repaired or
replaced by duly authorized and
qualified electricians.
At a minimum, power cord plugs must be
splash-proof.
Before starting any work on the
machine: Unplug the power cord (from
the wall socket).
Always unplug the power cord (from the
wall socket) before cleaning and
servicing the machine, as well as before
replacing parts.
Never spray the upper part of the
vacuum cleaner with water – Danger of
short-circuiting!
SE 122, SE 122 E
Applications
Vacuuming of dry, non-flammable
materials (dust, dirt, broken glass, wood
or metal shavings, sand, etc.) and non-
flammable liquids (dirty water, spilled
juices, etc.)
Suitable for more demanding
commercial or industrial use.
Other uses are not permitted and may
lead to accidents or damage to the
machine. The machine must not be
modified in any way – this may also lead
to accidents or damage to the machine.
Before starting work
Only connect the machine to a correctly
installed power socket.
Use only extension cords that comply
with the specifications for the respective
application.
Inspect the power cable and power plug.
Check that the machine is in good
working order in accordance with
regulations – refer to the corresponding
chapters in the owner's manual:
– Voltage and frequency of the
machine (see rating plate) must
match the voltage and frequency of
the mains supply.
– It must be possible to move the
switch to the 0 position easily.
– The switch must be in the 0 position.
During work
The machine may only be operated in an
upright position. Do not cover the
machine and ensure adequate motor
ventilation.
Do not let the machine run unattended.
Children, animals and bystanders must
remain at a distance.
Ensure that the power cable is not
damaged by being driven over,
squashed or pulled, etc.
Never disconnect the machine by pulling
the cable out of the socket: always grip
the plug itself.
The power cable and power plug must
never be touched with wet hands!
Always unroll the power cable from the
cable drum completely to avoid all risk of
fire due to overheating.
English
19