Function Check; Warnings - Truma Trumatic E 2400 Gebrauchsanweisung, Einbauanweisung

Function check

The leak tightness of the gas supply line must be tested using
the pressure drop method after installation. A test certificate
must be issued (e.g. in accordance with DVGW Worksheet G
607 for vehicles or G 608 for boats in Germany).
Then check all device functions as described in the operating
instructions.
The operating instructions must be handed over to the vehicle
owner.
Remove the type plate from the operating and installa-
tion instructions, and place on the heater in a clearly vis-
ible position where it will not be damaged. The year when the
equipment was first taken into operation must be indicated
with a cross on the type plate.

Warnings

The yellow sticker containing warning information that is
enclosed with the appliance must be affixed by the installer
or vehicle owner in a location in the vehicle where it is clear-
ly visible to all users (e.g. on the wardrobe door)! Missing
stickers can be requested from Truma.
26