struers Tenupol-3 Gebrauchsanweisung Seite 4

2
Tenupol-3
Instruction Manual
Tenupol-3
Safety Precaution Sheet
To be read carefully
before use
The operator must be fully instructed in the use of the instrument,
1.
according to this manual.
The operator must be fully instructed in the use of the electrolytes used
2.
with Tenupol-3.
Observe the current safety precautions regarding the handling, mixing,
3.
filling and disposal of the electrolyte.
Material Safety Data Sheets on request.
Check the model plate and the mains voltage selector prior to the
4.
power sully connection.
Check that the polishing unit is standing firmly on the support in order
5.
not to tip over.
Do not leave the instrument unattended when filled with electrolyte.
6.
The polishing process develops heat. Keep the electrolyte temperature
7.
below the flashpoint of the actual electrolyte.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.)