Operating Instructions; Symbols Used; Safety Instructions; General Instructions - Truma Mover SR Gebrauchs- Und Einbauanweisung

Table of Contents
Symbols used ...................................................................... 14
Safety instructions ........................................................... 14
General instructions ......................................................... 14
Batteries ............................................................................. 15
Function description ....................................................... 15
Operating instructions
Remote control .................................................................... 15
Remote control LED blink code and audio signal ............... 15
Remote control battery change .......................................... 16
Manoeuvring the caravan ............................................... 16
Coupling to a towing vehicle .......................................... 16
Maintenance ..................................................................... 16
Checks ................................................................................. 16
Troubleshooting ............................................................... 17
Tuning the electronic control unit to the
radio remote control ............................................................ 17
Declaration of conformity ............................................... 17
Technical data ................................................................... 17
Truma Manufacturer's Warranty ................................... 18
Installation instructions
Intended use ........................................................................ 18
Approval ............................................................................. 18
Tools and facilities required ................................................ 18
Minimum installation dimensions ...................................... 19
Measuring the frame height ................................................ 19
Determining the installation type ........................................ 19
Special accessory installation ............................................. 19
Selecting a location ............................................................. 20
Mud guards ....................................................................... 21
Fitting the drive elements ............................................... 21
Fitting the cross actuation device ....................................... 22
Electrical wiring and control unit .................................. 23
Connecting diagram ............................................................ 23
Connecting the drive motors ............................................... 23
Connecting the battery ........................................................ 23
Function check ................................................................. 24
Warnings ............................................................................. 24

Symbols used

Symbol indicates possible hazards.
Note containing information and tips.

Safety instructions

- Before using the Mover® outdoors for the first time, prac-
tice with it to familiarise yourself with the functions
of the remote control and of the Mover®.
- Before each use of the Mover®, check tyres and drive roll-
ers, removing any sharp stones and similar objects.
- The side slide switch on the remote control (ON / OFF)
also serves as an "Emergency Stop switch". Switch the
side slide switch to "OFF" immediately in the event of any
abnormalities, e. g. uncontrolled behaviour of the manoeu-
vring system.
- No person must be present in the caravan during operation.
- There must be no persons (particularly children) inside
the turning and movement range (manoeuvring range) of
the mobile home.
14
- When engaging and disengaging and while operating the
Mover® SR care must be taken to ensure that no hair, parts
of the body, clothing or other parts on the body can become
caught in moving and / or rotating parts (such as drive
rollers).
- During manoeuvring, the distance between the radio re-
mote control and the middle of the caravan must not ex-
ceed 10 m.
- In the event of a malfunction, apply the parking brake.
- In order to avoid tilting the caravan, when manoeuvring
on slopes the drawbar should be pointed downwards
(downhill).
- After manoeuvring, always apply the parking brake first,
disengage the drive rollers from the tyres and block
the wheels (especially on sloping surfaces!). The Mover® is
not suitable for use as a parking brake for the parked
caravan.
- Always protect the radio remote control from unauthorised
access (paying particular attention to children).
- Never tow the caravan with the drive rollers engaged, as
this may cause damage to the tyres, the towing vehicle and
the drive assemblies.
- All wheels and tyres on the caravan must be of the same
size and type.
- In order to ensure that the Mover® operates correctly, the
gap between the tyres and the disengaged drive rollers
must be 20 mm. All tyres must be inflated to the same pres-
sure in accordance with manufacturer's instructions and
checked regularly. Tyre wear or the fitting of new tyres may
make it necessary to readjust the gap between the drive
rollers and the tyres (see "Fitting the drive elements").
- When using a jack, the Mover® must not be used as a jack-
ing point, as this may damage the drive assembly.
- Sensitive objects such as cameras, DVD players etc. must
not be kept in the stowage box near the control unit or the
motor cables, as the powerful electromagnetic fields may
damage them.
- The empty weight of the vehicle increases by the weight of
the Mover®, which reduces the payload of the vehicle.
- When engaging, make sure that there are no objects (e.g.
stones, lumps of ice) between the engine and the engine
housing.

General instructions

The Mover® SR has been designed to cope with inclines of up
to approx. 13 % bearing a gross weight of 2000 kg on a suit-
able surface.
Depending on the weight of the caravan, the Mover® may
not be able to overcome obstacles more than about 2 cm
in height without auxiliary equipment (please use ascent
chocks).
As a result of the characteristic properties of a radio signal, it
may be interrupted by terrain / objects. This reduces reception
quality in small areas around the caravan, as a result of which
the operation of the Mover® may be briefly interrupted.
When the Mover® is switched off using the remote con-
trol, the control unit remains in standby. In order to
switch off completely the battery must be disconnected or an
isolating switch installed.