Start Up; Simple Operating Functions On The Device; Teaching - HomeMatic HM-LC-Dim1PWM-CV Installations- Und Bedienungsanleitung

7

Start up

7.1 Simple operating functions on the
device
You can operate the actuator immediately with the
channel button (teaching is not required) and check for
correct electrical installation. The button is used like an
ON/OFF toggle switch.
Only the brief button press is used for operation. The
longer button press (longer than 4 seconds) switches
the actuator into teach mode.

7.2 Teaching

Please read this entire section before starting
the teach-in procedure.
To integrate the dimming actuator into your Homematic
system and enable it to communicate with other
Homematic devices (e.g. Homematic Remote Control),
you must teach it in first. You can teach-in the dimming
acutator directly to other Homematic devices or to the
Homematic Central Control Unit:
44