Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Button
Brief button press
"ON" button
Brief button press
"OFF" button
Long button press
"ON" button
Long button press
"OFF" button
9
Resetting to factory status
In order to reset the actuator to factory status, switch
the device to teach mode with the (first) channel button
(hold button pressed for at least 4 seconds). If the
device is in teach mode, hold the (first) channel button
pressed down for at least 4 seconds. The actuator
reset is indicated by the device LED flashing quickly.
10 Device LED feedback messages
10.1 Flash codes
Different actuator states are indicated by the channel
LED flashing:
Behavior
ON
OFF
Brighter
Darker
49
Werbung
Kapitel
Inhaltsverzeichnis
