HomeMatic HM-LC-Dim1PWM-CV Installations- Und Bedienungsanleitung Seite 34

The LEDs used with the power supply have to
comply with the EMC standards EN55015,
EN61000-3-2, EN61000-3-3 and EN61547 as
well as to the safety standard EN61347-2-13.
Load the device to the specified limits only. An
overload can destroy the device, cause fires or
electrical accidents.
Do open the device only for replacing of fuses.
Always observe the safety notes.
Make sure that the specified wiring and wire
cross-sections are used when connecting to
device terminals.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material
lying around, as it can be dangerous in the
hands of a child.
Use a dry linen cloth to clean the device. If the
device is particularly dirty, you can slightly
dampen the cloth to clean it. Do not use any
detergents containing solvents for cleaning
purposes. Make sure that no moisture will
34