Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Slow flashing
Fast flashing
One long, x-short
(depends on the type
of error)
10.2 Operational status display
As soon as the dimmer is switched on, the device LED
is illuminated continually.
After configuring the actuator with the central control
unit or a programming tool, the device LED indicates
other device states besides those described.
11 Behavior after power restoration
After switching the operating voltage on (power
supply returned), the actuator checks the respective
components. If an error is detected during this test,
it is indicated by a flashing LED. This is repeated
continually and the device starts to work with the
respective functionality.
If the test runs without any errors, the actuator sends a
radio telegram with the respective status information.
The actuator waits a random delay time before
sending so that all actuators are not sending at the
50
Teach mode
Reset
Error
Werbung
Kapitel
Inhaltsverzeichnis
