Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Hazard information
The described actuator is a part of a building
installation. When planning and setting up
electrical systems, the pertinent standards and
regulations of the respective country of
installation are to be observed.
Operating the device is only permitted with an
external power supply unit (12-24 V
) which
DC
has to be selected according to the total
connected load of the LEDs.
The output of the power supply unit should
always be higher than the required power in
order to avoid unnecessary heating and to
dispose of power reserves.
The installation notes in the section
„Installation" must be observed! Ignoring
installation instructions can cause fires or other
hazards.
This device is to be operated indoors only and
keep away from the influences of humidity, dust
and sunshine or other radiating heat sources.
33
Werbung
Kapitel
Inhaltsverzeichnis
