Displaying And Deleting Measurements - Beurer BM 85 Gebrauchsanweisung

7. Displaying and deleting measurements

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measure-
ments.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the
START/STOP button
• Within 3 seconds of the full-screen display appearing,
select the desired user memory (
M2 memory button.
– To view the measurements for user memory
the M1 memory button.
– To view the measurements for user memo-
ry , press the M2 memory button.
Your last measurement will appear on the
display.
If Bluetooth is activated (the
®
appears on the display), measurements are
automatically transferred.
Press the M1/M2 button to cancel data
transfer. The device will show average
values. The symbol is no longer shown.
Press the M1 memory button if you have selected
user memory 1.
Press the M2 memory button if you have selected
user memory 2.
.
) with the M1 or
, press
symbol
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (mor-
ning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (eve-
ning: 6.00 p.m. – 8.00 p.m.).
30