Saving, Displaying And Deleting Measurements - Beurer BM 49 Gebrauchsanweisung

Risk indicator:
The measurements can be classified and evaluated in accordance with
the following table.
Blood pressure Systole
value category (in mmHg)
Setting 3: severe
≥ 180
hypertension
Setting 2: moder-
160 – 179
ate hypertension
Setting 1: mild
140 – 159
hypertension
High normal 130 – 139
Normal 120 – 129
Optimal < 120
Source: WHO, 1999 (World Health Organization)
The bar chart on the display and the scale on the unit show which cat-
egory the recorded blood pressure values fall into.
If the values of systole and diastole fall into two different categories (e.g.
systole in the High normal category and diastole in the Normal category),
the graphical classification on the device always shows the higher cat-
egory; for the example given this would be High normal.
Diastole
Action
(in mmHg)
≥ 110 seek medical attention
100 – 109 seek medical attention
90 – 99 regular monitoring by doctor
85 – 89 regular monitoring by doctor
80 – 84 self-monitoring
< 80 self-monitoring

7. Saving, displaying and deleting measurements

Whilst the message is being displayed, the volume can be adjusted
with the function buttons
The results of every successful
measurement are stored together
with the date and time. If there are
more than 60 measurements, the
oldest measurements are lost.
• Switch on the device with the
Start/stop button.
• Select the desired user memory
( or ) by pressing the function
buttons .
66
.
Voice output when voice function
is active
The device is ready for use.
You may start measuring.
User memory 1
User memory 2