Displaying And Deleting Measurements - Beurer M1502 Gebrauchsanweisung

Repeat the measurement if the flashing icon
after the measurement. Please note that you should rest for
5 minutes between measurements and not talk or move dur-
ing the measurement. If the icon
contact your doctor. Any self-diagnosis and treatment based
on the test results may be dangerous. It is vital to follow your
doctor's instructions.
Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood pres-
sure as well as the value above which your blood pressure is
classified as dangerous.
The classification on the display and the scale on the unit show
which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different WHO
categories (e.g. systole in the 'High normal' category and dias-
tole in the 'Normal' category), the graphical WHO classification
on the unit always shows the higher category; for the example
given this would be 'High normal'.
is displayed
appears often, please
Systolic (in mmHg)
≥ 180
160 – 179
140 – 159
130 – 139
120 – 129
< 120
WHO classification:
In accordance with the guidelines/definitions of the World Health
Organization and the latest findings, the measurements can be
classified and assessed according to the following table.
However, these standard values serve only as a general guide-
line, as the individual blood pressure varies in different people
and different age groups etc.
Diastolic (in mmHg)
≥ 110
100 – 109
90 – 99
85 – 89
80 – 84
< 80

7. Displaying and deleting measurements

The results of every successful measurement are stored
together with the date and time. If there are more than
60 measurements, the oldest measurements are lost.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the Start/
stop button
• Within 3 seconds of the full-screen display appearing,
select the desired user memory (
M2 memory button.
24
Measure
Seek medical advice
Seek medical advice
Have it checked regularly by doctor
Have it checked regularly by doctor
Check it yourself
Check it yourself
.
) with the M1 or