Yakima LockNLoad RuggedLine HD Installationsanleitung Seite 6

REMOVING FACTORY FLUSH ROOF RAILS
1 UNCLIP AND REMOVE
PLASTIC RAIL COVERS.
!
Avoid touching vehicle body when
levering the Trim Removal Tool
2
REMOVE BOLTS AND STORE SAFELY.
!
When removing fasteners, alternate between them to loosen them at an equal
rate. Otherwise the nutplate in the roof may dislodge or fall into the roof cavity.
3
REMOVE RAILS AND STORE SAFELY.
NOW PROCEED TO PAGE 10 - MOUNTING RUGGEDLINE HD.
21000326_8005200_RevB
10 mm
x6 x6
x12 x12
x2 x2
6/60